20"/27" x 40" TOS TRENCIN GAP BED ENGINE LATHE MODEL SN 50 C MACHINE RECONDITIONED, INCLUDING BED REGRINDING
S/N 450100920477

SWING OVER BED ---------------------------- 20"
SWING OVER CROSS SLIDE -------------------- 10.63
SWING OVER GAP ---------------------------- 27.56"
CENTER DISTANCE --------------------------- 40"
WIDTH OF BED ------------------------------ 13.5"
CROSS SLIDE TRAVEL ------------------------ 12"
TOOL SLIDE TRAVEL ------------------------- 5.5"
SPINDLE NOSE ------------------------------ CAMLOCK D1-6
SPINDLE BORE ------------------------------ 2.027"
SPINDLE SPEEDS ------ ( 24 ) -------------- 22.4 TO 2000 RPM
MAIN DRIVE MOTOR -------------------------- 8.8 HP, 220/440/3/60
LONGITUDINAL FEED ------------------------- 0.00197 TO 0.252 IPR
CROSS FEED -------------------------------- 0.00984 TO 0.126 IPR
RANGE OF METRIC PITCH --------------------- 0.05 TO 40 MM
RANGE OF INCH THREADS --------------------- 1 TO 80 TPI
RANGE OF MODULE PITCH --------------------- 0.25 TO 20
RANGE OF DIAMETRAL PITCH ------------------ 2 TO 72
TAILSTOCK QUILL TAPER --------------------- #5 M.T.
TAILSTOCK QUILL TRAVEL -------------------- 7"
TAILSTOCK QUILL DIAMETER ------------------ 2.750"
LEADSCREW DIAMETER ------------------------ 1.500"
LEADSCREW PITCH --------------------------- 4 TPI

EQUIPPED WITH ---
HARDENED AND GROUND BED WAYS AND GEARS
TIMKEN ROLLER BEARINGS
BUILT-IN COOLANT SYSTEM
RAPID TRAVERSE
6 JAW CHUCK
FOLLOW REST
STEADY REST
TAPER TURNING ATTACHMENT
EMERGENCY STOP BUTTONS
CROSS SLIDE MICRO-STOPS
THREAD DIAL INDICATOR
CENTRAL LUBRICATION
CHIP PAN
T-SLOTTED CROSS SLIDE REAR
WORK LIGHT
VERY GOOD CONDITION

PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATION OR CHANGE.
UNDER POWER

WEIGHT: 3600 LBS
DIMENSIONS (IN.): N/A